Video Download
Using a Harley Fuel Pressure Tester
$6.98
Purchase video and add to your personal library with on-demand video access.
- Enjoy on-demand video access to this content anytime, anywhere for the one-time cost below.
- You won’t lose access, with or without an active current Membership
Item:
Y0A39u
Description
Description
Poor fuel economy, hesitation, cutting out, and no start are all symptoms of improper fuel pressure. In this video, Mike walks us through the use of a Harley-Davidson fuel pressure tester gauge to identify the fuel pressure on your Harley motorcycle.
There are a handful of reasons that an injected fuel system may have a low or fluctuating output.
There may be a pinhole in an aging fuel line. The fuel filter may be clogged. The fuel pump regulator may be bad. The pump itself could fail.
To perform a correct fuel pressure test, you will need to purchase, rent, or borrow a quality Harley fuel pressure tester gauge with the correct adapters to fit your Harley-Davidson output fittings. Your factory service manual is also an important tool to have nearby when diagnosing a failing fuel system.
Begin the test by removing your fuel pump fuse and running the m/c until it stalls. This will diminish or eliminate the fuel pressure in the system and allow you to safely unplug the fuel delivery line from the fuel tank. Before disconnecting this line, Mike recommends that you spray it with a little light penetrating oil. This will help you to work past any corrosion in the fitting and allow you to remove the line without damaging the O-ring inside the tank fitting. Disconnect this line by pulling up on the fitting and down on the line.
Next, you will plug in your fuel gauge and reinstall the fuel pump fuse to its correct location. Now, start your motorcycle and record the reading on the fuel gauge. Use your service manual to complete the diagnosis based on your reading.
Correct fuel pressure is vital for complete fuel system function and operation. Listen to Mike’s advice in this video—grab your fuel pressure gauge and your service manual. This is everything you need to perform this test the way the techs do at the dealerships.
You are completely prepared to perform a fuel pressure test using a Harley fuel pressure tester gauge on your Harley-Davidson.
Related Videos:
Draining Sportster Gas Tank & Filter Service
Sportster Fuel Filter Location and Replacement
Harley Fuel Pump and Filter Removal
Draining Fuel & Fuel Tank Filter (Early Models)
Harley Fuel Filter Removal on a Softail or Dyna
Harley-Davidson Fuel Gauge Removal and Replacement
Dyna Gas Tank Removal
Café Racer Gas Tank Install and Start
Harley M8 Fuel Tank Install
XL Gas Tank Removal
Sportster Handlebars, Seat, Battery, Tank Removal
Harley-Davidson Twin Cam Fuel Tank Removal
Twin Cam 103 Fuel Tank Removal
Twin Cam 103 Fuel Tank Install
Evo 2 Piece Harley-Davidson Fuel Tank Removal
Custom Clutch Cable #2/Fuel Tank, Gauge & Clutch Cable Removal
Cooling Hot Harleys with Love Jugs
Paint Your Harley
M8 Softail Harley-Davidson Fuel Tank