My stator is bad and bought a new one. While I was setting torque on the fastener, I broke three and was able to take one off. The other two our in the top of the stator. It’s impossible to take off and tried everything for the last two weeks. My question is: can I only use two fastener on the stator to hold it with locknut or two mush pressure on the two fastener and will eventually brake?
Via Email
We would not recommend trying to secure with only 2 screws. We would suggest drilling & extracting the broken hardware. You should be able to use a steel insert or heli coil to complete the repair.
Related Fix My Hog Videos:
How To Remove Stripped Bolts
Have more questions? Check out our Q&A index page to find some answers.
You Drill into the existing stud and use EZ outs to remove them.
having a hard time trying ti take main screw form the stator 2006 flhtcl
I have an 2006. When I first start the M/C charges fine after driving a couple of miles discharges when stopped.
I'm replacing my stator, can't seem to get my rotor off, seems I can slide it half way off the shaft then it wants to spring back, i'm pretty sure my stator burned out do you think some of the windings are stuck on something? Stan
Installed a recharging station on the handlebar of my XG500 street bike... put everything back but, bike won't start now... did I pinch something under the tank perhaps?
When are you going to have some vidios & info on the Harley Davidsons Trike Ultra